Model：GMU-165 GMU-200 GMU-250 GMU-300 GNU-165 NU-120 QNU-120
Specifications / features:
The U multi axle device is made up of gears and universal joints. The adjustment distance is very convenient, which is not limited by the gears. It can save a lot of adjustment time, and has no limitation of dead angle. It is fast and convenient to operate, and it is the best selling specification in adjustable. In order to save the life of the universal joint, the range of movement should not exceed 15 degrees, equal to about 30mm in the front and back of the vertical. (as far as possible with the design of workpiece hole distance)| Type | Maximum axis Range m/m | minimum distance (two axis) m/m | Applicable chuck | Maximum borehole Ability m/m | Axis number |
| GNU-165 | 165 | 12.5 | Collet:C-5，CT-5 Drill chuck:3/8" JT1 | φ4.5 | 2～10 |
| GMU-165 | 165 | 18.5 | Collet:C-5，CT-5,C-6，CT-6 Drill chuck:3/8" JT-1 | φ6.0～φ8.0 | 2～8 |
| 26 | Collet:C-5，C-6，C-9，CT-5，CT-6，CT-9 Drill chuck:3/8" JT-1 | ||||
| GMU-200 | 200 | 18.5 | Collet:C-5，C-6，C-9，CT-5，CT-6，CT-9 | φ6.0～φ8.0 | 2～10 |
| 26 | Drill chuck:3/8" JT1 | ||||
| GMU-250 | 250 | 18.5 | Collet:C-5，C-6，C-9，CT-5，CT-6，CT-9 | φ8.0 | 2～12 |
| 26 | Drill chuck:3/8" JT1 | ||||
| GMU-300 | 300 | 18.5 | Collet:C-5，C-6，C-9，CT-5，CT-6，CT-9 | φ8.0 | 2～15 |
| 26 | Drill chuck:3/8" JT1 |
